China Wire Rope Clamp Manufacturers Factory Suppliers

The Wire Rope Clamp body is malleable iron and the other parts are hot-dip galvanized steel.

The clamp body and wedge are malleable iron,the other parts are hot-dip galvanized steel.Thief-proof equipment can be supplied if it is needed.

The Wire Rope Clips is a guy wire fitting and mainly used for temporary connection and fixing of steel wire ropes.

The wire rope clamp,in other words,Rope Clips, are mainly used for temporary connection and fixing of steel wire ropes. It is a clamp which widely used in lifting operation.

The NUT Wedge Clamp consists of a body of hot-dip galvanized malleable iron,  wedges and hot-dip galvanized steel component.

Stay Wire Clamp is used for telco and CATV aerial plant to terminate and hold the end of the lashing wire, either at an interruption in continuity or at the end of the lashing wire coil.

Lashing Wire rope Clamp is used for telco and CATV aerial plant to terminate and hold the end of the lashing wire, either at an interruption in continuity or at the end of the lashing wire coil.

The cross joint is used to fix the wire on pole.Good electrical conductivity.

The clip body of Wire Rope Clamp is malleable iron and the other parts are zinc plating coloring steel.

The Thimble Clevis is mainly used to connect the preformed rod tension clamp with other linking fittings.

The function of the stay rod is that when only one side of the pole is wired, the power will be unbalanced. In order to achieve balance, the end without wires needs to be fixed by a wire rope, one

Generally,the parallel groove clamp is no bearing strength type,mainly devided into:bolt type parallel groove clamp,H type(or C type)parallel groove clamp and wedge type parallel groove clamp.And the