Shackle

The clevis&togue steel plate pole cable fitting U clevis tongue is made of Hot-dip galvanized steel. It is used with bands in pole installations and with screws in wall installations.

The u shackle is one of the general power fittings used in overhead power transmission line.It is forged by hot-dip galvanized round steel,which can be single or series widely used.

The twisted u shackle is one of the general power fittings used in overhead power transmission line.It is forged by hot-dip galvanized round steel,which can be single or series widely used.

The anchor shackle is mainly used for overheard transmission line and substation, it is made of hot-dip galvanized steel.

The rounded U shaped design of anchor shackles allows them to take loads from many directions without developing significant side load. The screw pin allows for easy attachment and detachment with a

Link fittings are mainly used in power transmission line or substation,string assembly of insulators,connection of serial insulator chains,connection of wires and lightning clamps and connection of

Hot-dip Galvanized U Shackle/U Type Shackle Clevis are malleable iron or casting steel, these cotter pins are stainless, the other parts are hot-dip galvanized. They are used to connect insulator and

It is forged by round steel and could be single or series used.The u shackle for overhead power line widely used to change the angle and lengthen the strain insulators.

Breaking Load of D Anchor Shackle:70KN,120KN,160KN,210KN,250KN. The cotter pin of D Anchor Shackle is stainless steel,the other parts are hot-dip galvanized steel.