China Balance Counter Weight Piece Manufacturers Factory Suppliers

The counter weight is used on overhead transmission lines and is a kind of electric power fittings. Its main function is to prevent the wires from swinging from side to side after being blown by

Square Frame Spacer Damper is used to ensure that the split wire harness inspection tool remains unchanged, and in the event of a short circuit, no electromagnetic force is generated between the wire

Square Frame Spacer Damper are installed on multi-bundle conductors to keep certain distance among each conductor so as to avoid impact and restrain wind vibration and sub-span oscillation.

Description: Spacer dampers were originally developed to suppress bundle conductor subspan oscillations that could cause damage to the multi-conductor bundle systems. Later, it was determined that

The down lead clamp is used in rivet the fiber when jumping or down lead , and it was commonly installed every 1.5 to 2 meter each set .

The high strength ground wire clamp is used for joining copper bond threaded earth rods together.

The resuable threaded driving heads are suitable for driving copper bond threaded earth rods by hand or with o power hammer.The driving head screws into the threaded coupling to allow deep driving of

Each of conductors for long-distance and big-capacity super high voltage transmission lines are adopted two, four and more split wires. So far 220KV and 330KV transmission lines are equipped with two

The triple spacer damper is mainly used for lines in areas where the wires are prone to vibration. Non-damped spacers have poor shock absorption properties, and can be applied to lines that are not

The protective fitting is used as itself or matching with other various types electric installation,which plays a role of protection for electrical performance or mechanical performance.Moreover,It

Two Split spacer dampers help to prevent electrical arcing. This occurs when two cables come into contact with each other and create a spark. If left unaddressed, arcing can cause serious damage to

The clamp of Hot-dip Galvanized Vibration Damper for power line is aluminum alloy,counter weights are zinc alloy,the other parts are hot-dip galvanized steel.