Substation Fitting

Compression termical connectors are mainly used to connect the down leads of substation busbars to the outlet terminals of electrical equipment (such as transformers, circuit breakers, isolating

Hydraulic Terminal Connectors are used to connect cables or wires to prevent wires from loosening or breaking due to vibration or other factors in the equipment, thereby providing more stable and

Copper alloy terminal connector, 1/0 Sol.-500 kcmil, 5.62 in Length, Cable toPad.

The bimetal transition plate is used to connect the bus-bar down conductor to the outlet terminal of electrical equipment (such as transformers,circuit breakers,transformers,isolating switches,wall

Tubular busbar clamps are iron or aluminum metal accessories widely used in transmission and distribution lines.

Its down wire terminal is single plate, suitable for down lead arrangement.

It is suitable for the connection of the inlet and outlet of the conductive column of the transformer and other equipment.

It is suitable for transition connection of the electric appliances of indoors distributing device and kinds of wire cables.

The T type clamp is adopted bolts for firmly fixing conductor in which the clamp and gland (other parts consist of hot dip galvanized steel) are made up of copper and aluminum as raw material for

The Cable Cleat is made of high-strength anti-corrosive aluminum alloy to secure the placement of 3 cables.

This bolted type T connecting is light and material saving and with good contact and installed conveniently.However,once installed,it can not be removed and is suitable for constructions of new built

The transformer connectors are used to connect tap conductor to transformer.