China pipe splicing lot Manufacturers Factory Suppliers

The insulated terminal is one of the power transmission line accessories to realize electrical connection.

The C type connector belongs to the field of non-load-bearing connectors in the power network, and is particularly suitable for the connection of the branch wires of the main line and the sub-line in

Parallel groove clamps are mainly used for transmitting current between the interconnected conductors.

The copper C clamp is normally used for connecting of copper wires.

The Bolted Type PG Clamp is suitalbe for unendure force splicing and branch on the aerial wire, being used with insulation cover.

Guy Wire Parallel Groove Clamp is used for the fixation of steel strand terminals in power lines, the fixation of stay wire terminals, the fixation of diagonal stay wires, etc.

The PG clamp body and keepers are aluminium alloy, the other parts are hot-dip galvanized steel.

There is no need to remove the insulator skin of cable to make the cable branch.The main cable do not need to be cut down,the branch can be made at any place of the cable as the joint is completely

Power accessories Aluminum parallel groove clamp,which is called PG clamp, is designed to connect two parallel bare conductors which can be aluminum alloy or aluminum steel reinforced.

Our PG clamps are divided into: Aluminium PG clamp, Copper PG clamp, Bimetallic PG clamp. The parallel groove clamp is suitalbe for unendure force splicing and branch on the aerial wire, being used

The galvanized guy clamp is used for connecting or branching steel wires.

Parallel Groove PG Clamp is used in the connecting of Aluminum cable, Steel cored Aluminum cable or overhead ground wire strand for small and medium-size section at the position of not under tension,