China washer link fitting Manufacturers Factory Suppliers

The turnbuckle is hot-dip galvanized steel and composed of left and right hand thread adjustment rod,nut and pull rod,of which the anti-theft and locking device consist of anti-theft and locking bolt

The Forged ball clevis is used to attach ball and socket insulators to other associated hardware.

As an important link fitting in power grid construction, Socket Clevis Tongue is mainly used to connect suspension clamps with insulators,which plays a role of connecting conductors and insulating

The Y type ball clevis is used to combine insulators, suspension clamps, strain clamps and protective fittings into suspension or strain resistance. This exquisite component, despite its small size,

Foundation bolts can be divided into fixed anchor bolts, movable foundation bolts, expansion foundation bolts and adhesive foundation bolts, which also can be divided into l-type embedded bolts,

The turnbuckle is also called turn buckle,which is a wire rope clamp used to bind and fasten steel wire rope.

Wire Rope Thimbles are used in wire rope assemblies to keep an eye from being crushed. When a wire rope assembly is terminated with an eye or loop at the end, a cable thimble is inserted to form the

Ball Y-clevises are used to attach ball and socket insulators to other associated hardware. The bent bolt in the Y-clevis section provides an additional point of articulation.

The socket eye is made of hot-dip galvanized steel. The security clip is stainless steel and the cotter pin is stainless steel.

Breaking Load of D Anchor Shackle:70KN,120KN,160KN,210KN,250KN. The cotter pin of D Anchor Shackle is stainless steel,the other parts are hot-dip galvanized steel.

It can be processed by steel plate or ball mill cast and cast steel according to the structural features.

The special type includes the ball-eye and socket-clevis linking with insulator.The common type is usually pin connected type.They have differ-end grades according to the load and are exchangeable