China circuit board link fitting Manufacturers Factory Suppliers

Wire Rope Thimbles are used in wire rope assemblies to keep an eye from being crushed. When a wire rope assembly is terminated with an eye or loop at the end, a cable thimble is inserted to form the

The Forged ball clevis is used to attach ball and socket insulators to other associated hardware.

Normally, the hinge clevis for power line is used as first fitting in overhead line strings. The first fitting used for the connection of overhead line hanging metal fittings and steel towers, also

Link fitting are used to link clamps to insulator,or to link insulator and ground wire clamps to arms or subjection strutures.

As one of link Fittings, the twisted chain link is used to link clamps to insulator, or to link insulator and ground wire clamps to tower arms or subjection structures.

The Hot-dip Galvanized U Type Shackle is an nonstandard part and its sharp is U Type.The thread in the two ends can be combined with nut.

Link fittings are mainly used in power transmission line or substation,string assembly of insulators,connection of serial insulator chains,connection of wires and lightning clamps and connection of

Link fitting is used in connection between insulator chain and pole tower,insulator chain and other power fittings and insulators,which bearing mechanical load and composed of specialized link

The U bolt, is also known as U-bolts,which is an nonstandard part and its sharp is U Type.The thread in the two ends can be combined with nut.It is called U bolt for the way of fixing item like a man

It is forged by round steel and could be single or series used.The u shackle for overhead power line widely used to change the angle and lengthen the strain insulators.

The yoke plate is made of hot-dip galvanized steel. The plate can be adjusted according to the requirements of customers including shape,sizes and so on.

The adjusting plate plays a crucial role in ensuring the safety and reliability of the power transmission system. It is designed to facilitate the adjustment of the height and angle of the conductor