Products

Wire Rope Thimble

Wire Rope Thimbles are used in wire rope assemblies to keep an eye from being crushed. When a wire rope assembly is terminated with an eye or loop at the end, a cable thimble is inserted to form the eye of the loop before the rope is secured.

Send Inquiry Chat Now

Description

Quality requirements:

1.The wire rope thimble should be smooth and flat without any crack,defect,sharp edge and roughness in the surface which will damage the steel rod.The tip of the thimble should fit freely and be cut to the half depth of the groove.

2.The wire rope thimble surface should be hot-dip galvanized without roughness,leakage galvanized,zinc granule,bubble and crack.The zinc coating should have enough adhesive strength in general application.

3.The wire rope thimble material could be A3 steel or 15、35 quality carbon steel.

4.The safe fail loading of wire rope thimble should be no less than 32% of the maximum breaking force of steel rod.

5.The selection for wire rope thimble should be in accordance with the specification of steel rod.The diameter of shaft pin used should be no less than twice diameter of steel rod.

A (mm)	B (mm)	C (mm)	H (mm)	S (mm)	L (mm)	Wight (kg)
2	14	7	11.5	0.8	20	0.001
3	16	10	16	0.8	23	0.002
4	18	11	17	1	25	0.003
5	22	12.5	20	1	32	0.005
6	25	14	22	1	37	0.007
8	34	18	29	1.5	48	0.017
10	43	24	37	1.5	56	0.026
12	48	27.5	42	1.5	67	0.040
14	50	33	50	2	72	0.060
16	64	38	55	2	85	0.079
18	68	41	61	2.5	93	0.124
20	72	43	65	2.5	93	0.124
22	77	43	67	2.5	106	0.172
24	77	49	73	2.5	110	0.198
32	94	62	90	3	134	0.370

1567731681(1)

other product you may need

Hot Tags: wire rope thimble, China, manufacturers, suppliers, factory, customized, Post Type Composite Insulator, Wing Forged Eye Bolt, Galvanized Eye Nut, New Product Galvanized Eye Nut, Galvanized Anchor Bolt, Power Fitting Turnbuckle

Galvanized Ball Eye

Guy Dead End Hook