China U Shackle For Power Line Manufacturers Factory Suppliers

It is forged by round steel and could be single or series used.The u shackle for overhead power line widely used to change the angle and lengthen the strain insulators.

The clevis&togue steel plate pole cable fitting U clevis tongue is made of Hot-dip galvanized steel. It is used with bands in pole installations and with screws in wall installations.

The u shackle is one of the general power fittings used in overhead power transmission line.It is forged by hot-dip galvanized round steel,which can be single or series widely used.

The twisted u shackle is one of the general power fittings used in overhead power transmission line.It is forged by hot-dip galvanized round steel,which can be single or series widely used.

The anchor shackle is mainly used for overheard transmission line and substation, it is made of hot-dip galvanized steel.

Link fitting are used to link clamps to insulator, or to link insulator and ground wire clamp to tower arms or subjection structure. Link fitting have special type and common type in accordance with

The rounded U shaped design of anchor shackles allows them to take loads from many directions without developing significant side load. The screw pin allows for easy attachment and detachment with a

Link fittings are mainly used in power transmission line or substation,string assembly of insulators,connection of serial insulator chains,connection of wires and lightning clamps and connection of

The U bolt, is also known as U-bolts,which is an nonstandard part and its sharp is U Type.The thread in the two ends can be combined with nut.It is called U bolt for the way of fixing item like a man

Hot-dip Galvanized U Shackle/U Type Shackle Clevis are malleable iron or casting steel, these cotter pins are stainless, the other parts are hot-dip galvanized. They are used to connect insulator and

Breaking Load of D Anchor Shackle:70KN,120KN,160KN,210KN,250KN. The cotter pin of D Anchor Shackle is stainless steel,the other parts are hot-dip galvanized steel.

The socket eye for overhead transmission power line is malleable iron, hot-dip galvanized and the ecurity clip is stainless steel.