China Anchor U Shackle Manufacturers Factory Suppliers

The u shackle is one of the general power fittings used in overhead power transmission line.It is forged by hot-dip galvanized round steel,which can be single or series widely used.

The clevis&togue steel plate pole cable fitting U clevis tongue is made of Hot-dip galvanized steel. It is used with bands in pole installations and with screws in wall installations.

The twisted u shackle is one of the general power fittings used in overhead power transmission line.It is forged by hot-dip galvanized round steel,which can be single or series widely used.

The anchor shackle is mainly used for overheard transmission line and substation, it is made of hot-dip galvanized steel.

Link fitting is used in connection between insulator chain and pole tower,insulator chain and other power fittings and insulators,which bearing mechanical load and composed of specialized link

The rounded U shaped design of anchor shackles allows them to take loads from many directions without developing significant side load. The screw pin allows for easy attachment and detachment with a

Link fittings are mainly used in power transmission line or substation,string assembly of insulators,connection of serial insulator chains,connection of wires and lightning clamps and connection of

The clevis is a strip shape connector to fix with screw or assemble with bolt or a connecting plate,of which both ends are strip shape connectors.

The Galvanized Pigtail Screw is similar to machine screw,only the thread in the screw is specialized for wood screw,which can be directly screwed into wooden components or parts to tightly connect a

Hot-dip Galvanized U Shackle/U Type Shackle Clevis are malleable iron or casting steel, these cotter pins are stainless, the other parts are hot-dip galvanized. They are used to connect insulator and

It is forged by round steel and could be single or series used.The u shackle for overhead power line widely used to change the angle and lengthen the strain insulators.

Breaking Load of D Anchor Shackle:70KN,120KN,160KN,210KN,250KN. The cotter pin of D Anchor Shackle is stainless steel,the other parts are hot-dip galvanized steel.