China Two Split Spacer Damper Manufacturers Factory Suppliers

Two Split spacer dampers help to prevent electrical arcing. This occurs when two cables come into contact with each other and create a spark. If left unaddressed, arcing can cause serious damage to

Square Frame Spacer Damper is used to ensure that the split wire harness inspection tool remains unchanged, and in the event of a short circuit, no electromagnetic force is generated between the wire

The body of Square Spacer Damper, keepers and bracket are aluminium alloy, dampers are elastomer, the other parts are hot-dip galvanized steel.

Square Frame Spacer Damper are installed on multi-bundle conductors to keep certain distance among each conductor so as to avoid impact and restrain wind vibration and sub-span oscillation.

Description: Spacer dampers were originally developed to suppress bundle conductor subspan oscillations that could cause damage to the multi-conductor bundle systems. Later, it was determined that

spacer damper is needed to be installed on the interval among different spans. Moreover, the installation of spacer damper will be also helpful to remove the swing on span and aero vibration.

Each of conductors for long-distance and big-capacity super high voltage transmission lines are adopted two, four and more split wires. So far 220KV and 330KV transmission lines are equipped with two

The triple spacer damper is mainly used for lines in areas where the wires are prone to vibration. Non-damped spacers have poor shock absorption properties, and can be applied to lines that are not

Spacer dampers are used to the fittings installed on the split wires to fix the spacing between the split wires to prevent the wires from whipping each other and suppress the breeze vibration and

Spacer Damper For Double Cable are essential components in electrical power lines that prevent the fatigue damage caused by vibration. These devices are installed in between the conductor and support

The Aluminium Hexagon Spacer Damper is mainly used to limit the relative motion between the conductors and to maintain the geometry of the spliting conductors under normal operation.For long

The body of spacer damper,keepers and bracket are aluminium alloy,dampers are elastomer,the other parts are hot-dip galvanized steel.