China switch link fitting Manufacturers Factory Suppliers

Link fitting are used to link clamps to insulator,or to link insulator and ground wire clamps to arms or subjection strutures.

The socket clevis is made of hot-dip galvanized steel. Security clip is stainless steel, the cotter pin is stainless steel.

Normally, the hinge clevis for power line is used as first fitting in overhead line strings. The first fitting used for the connection of overhead line hanging metal fittings and steel towers, also

The thimble eyelet is one of the frequently-used power line fittings, which generally used to connect conductors,earth wires and other fixed structure.For the complex shape and convenience of

The u shackle is one of the general power fittings used in overhead power transmission line.It is forged by hot-dip galvanized round steel,which can be single or series widely used.

As one of link Fittings, the twisted chain link is used to link clamps to insulator, or to link insulator and ground wire clamps to tower arms or subjection structures.

The ball clevis is used for high voltage overhead transmission line, the acring horn can be installed on it.

The Y type ball clevis is used to combine insulators, suspension clamps, strain clamps and protective fittings into suspension or strain resistance. This exquisite component, despite its small size,

The shape of LF type yoke plate is just like a rectangle in which an oval hole is located in the middle position; it is used for connection between two pieces of separate conductors subjected to

Foundation bolts can be divided into fixed anchor bolts, movable foundation bolts, expansion foundation bolts and adhesive foundation bolts, which also can be divided into l-type embedded bolts,

The eye nut is mainly used in lock steel wire,steel tube and other types mechanical combination

The cotter pin is stainless steel, the other parts are hot-dip galvanized steel.