China handrail link fitting Manufacturers Factory Suppliers

The cotter pin is stainless steel, the other parts are hot-dip galvanized steel.

The extension ring is used for connection between insulator strings and fittings, between clamps and insulator strings, between lightning rod and tower.

As one of Link fitting, the extension Y clevis is used to link other fittings in tension strings.

The socket tongue is made of hot-dip galvanized steel. Security clip is stainless steel, the cotter pin is stainless steel.

The turnbuckle is hot-dip galvanized steel and composed of left and right hand thread adjustment rod,nut and pull rod,of which the anti-theft and locking device consist of anti-theft and locking bolt

The yoke plate is made of hot-dip galvanized steel. It can be made according to the requirements of customers including shape, sizes and so on.

The rounded U shaped design of anchor shackles allows them to take loads from many directions without developing significant side load. The screw pin allows for easy attachment and detachment with a

Wire Rope Thimbles are used in wire rope assemblies to keep an eye from being crushed. When a wire rope assembly is terminated with an eye or loop at the end, a cable thimble is inserted to form the

The Hot-dip Galvanized Turnbuckle can adjust the tightness of steel rope by stretching out and drawing back the the leading screw.It can be used to binding components in component transition and

The double extension link is used for connection between insulator strings and fittings, between clamps and insulator strings, between lightning rod and tower.

It is forged by round steel and could be single or series used.The u shackle for overhead power line widely used to change the angle and lengthen the strain insulators.

The ball eye or ball clevis for power line is made of hot-dip galvanized steel. The sizes can be designed according to requirements.