China NUT Wedge Clamp Manufacturers Factory Suppliers

The NUT Wedge Clamp consists of a body of hot-dip galvanized malleable iron,  wedges and hot-dip galvanized steel component.

This is zinc plated triple forged wire rope clamp.

Stay Wire Clamp is used for telco and CATV aerial plant to terminate and hold the end of the lashing wire, either at an interruption in continuity or at the end of the lashing wire coil.

The cross joint is used to fix the wire on pole.Good electrical conductivity.

The clip body of Wire Rope Clamp is malleable iron and the other parts are zinc plating coloring steel.

The thimble clevis is mainly used together with preformed tension clamp to wrap steel strand or used as gasket for steel wire rope.

The Thimble Clevis is mainly used to connect the preformed rod tension clamp with other linking fittings.

The function of the stay rod is that when only one side of the pole is wired, the power will be unbalanced. In order to achieve balance, the end without wires needs to be fixed by a wire rope, one

The stay rod is used to fix the pole so that it does not fall to one side. Usually one or two stay rods are installed on a pole.

The U channel steel is a strip shape rolled steel with groove shape section.It is a kind of carbon structural steel for construction and mechanical use and a profiled steel with complex sections,of

The stay rod is used for installation of galvanized iron wire strands as well as fixture of overhead ground wire and guy grip on guy-strained tower; it makes use of arm force subjected to the wedge

Generally,the parallel groove clamp is no bearing strength type,mainly devided into:bolt type parallel groove clamp,H type(or C type)parallel groove clamp and wedge type parallel groove clamp.And the