China splicing plumbing Manufacturers Factory Suppliers

The copper cable terminal is an appliance that connects the copper terminal and the wire with a special crimping pliers at the end of the wire in order to ensure reliable and convenient wiring in the

The C type Clamp is made of high strength alloy of elasticity with good electrical conductivity and according to different specifications of wires, it is designed with a specific shape of wire groove

The copper split bolted connector is suitable for the sequence and transportation of conductor in electricnetting, made of copper. Split-bolt has free-running threads and easy to grip wrench flats.

The copper-aluminium bimetallic cable lugs are suitable for transition connection of the circular aluminium wires, hemicycle-sector aluminum wires, power supply cables in the distribution equipment

Watertight mould for tapping services or mains with insulation piercing (FT) with 1 or 2 taps.This mould is to be used with our simultaneous tightening connectors type TTD as can use for separate tap

The Bimetallic PG Clamp is applied for non-bearing connection of conduction and branch,which is usually used with insulating cover to play a role of insulating and protecting.

The J type pg clamp belongs to shaped parallel groove clamp.The parallel groove clamp is used to connection of AAC or ACSR of small and medium-sized section and steel strand of overhead lightning

This series insulation piercing connector is mainly used for wire branching The applicable voltage is 10kV, 1kV and less more than 1kV.

The bimetallic Al-Cu parallel groove clamp is a widely used contact fitting to transfer electric load and parallel wires.The splicing of jumper wire for non-linear tower,branch

Aerial insulation aluminium conductor and insulation aluminium cover are being used together action is insulation protection .

Under the rated voltage,the splicing point temperature should not higher than the conductor temperature when through the max load electric current for long time.

The Aluminium Compression Tap Connector is generally used in connection of jumper wires,branch lines,lead wires,service mains and other wires on the tower in overhead high-voltage and low-voltage