China pipe splicing joint Manufacturers Factory Suppliers

The copper-aluminium bimetallic cable lugs are suitable for transition connection of the circular aluminium wires, hemicycle-sector aluminum wires, power supply cables in the distribution equipment

Bimetallic Bolted Mid Span Joint is mainly used for splicing connections between insulated wires, aluminum stranded wires, aluminum alloy stranded wires, and steel-cored aluminum stranded wires at

Hydraulic Jumper Connectors are used to bridge two electrical components in a circuit, thereby providing a continuous flow of current. They are designed to withstand high voltage and current loads,

CTO Type Aluminum Cable Connector is suitable for branching identical cross-sections and no need to split the main conductor.

Copper parallel groove clamps are contact fittings that connect wires in parallel to transfer electrical loads. They are widely used, such as jumpers for non-straight poles and towers, T-wiring at

Earthing PG Clamp is suitable for grounding connections and high-voltage line discharge connections in overhead insulated lines of 20kV and below. Earthing PG Clamp is used in conjunction with the

Copper Connecting Tube adopts tin plating process, which has good electrical conductivity and connects wires and electrical equipment in power distribution devices.

Watertight mould for tapping services or mains with insulation piercing (FT) with 1 or 2 taps.This mould is to be used with our simultaneous tightening connectors type TTD as can use for separate tap

Power accessories Aluminum parallel groove clamp,which is called PG clamp, is designed to connect two parallel bare conductors which can be aluminum alloy or aluminum steel reinforced.

Insulation piercing connector is mainly suitable for the connection of the overhead insulation conductor, branch connection and grounding protection, It is used for the voltage which is 20KV, 10KV

The bimetallic Al-Cu parallel groove clamp is a widely used contact fitting to transfer electric load and parallel wires.The splicing of jumper wire for non-linear tower,branch

AS a splicing fitting,the parallel groove clamp for transmission power line is suitable for unending force splicing and branch on the aerial wire,being used with insulation cover.Its action is