China pipe splicing bore Manufacturers Factory Suppliers

The Down Leading clamp is uswd to fix the cable to splice pole/tower and terminal pole/tower in the down-lead to the closure.

The C type connector belongs to the field of non-load-bearing connectors in the power network, and is particularly suitable for the connection of the branch wires of the main line and the sub-line in

Parallel groove clamps are mainly used for transmitting current between the interconnected conductors.

The Bolted Type PG Clamp is suitalbe for unendure force splicing and branch on the aerial wire, being used with insulation cover.

The Bolted Type C Connector is made of high strength alloy of elasticity with good electrical conductivity and according to different specifications of wires, it is designed with a specific shape of

The PG clamp body and keepers are aluminium alloy, the other parts are hot-dip galvanized steel.

The copper split bolted connector is suitable for the sequence and transportation of conductor in electricnetting, made of copper. Split-bolt has free-running threads and easy to grip wrench flats.

There is no need to remove the insulator skin of cable to make the cable branch.The main cable do not need to be cut down,the branch can be made at any place of the cable as the joint is completely

Insulation piercing connector is mainly suitable for the connection of the overhead insulation conductor, branch connection and grounding protection, It is used for the voltage which is 20KV, 10KV

Aerial insulation aluminium conductor and insulation aluminium cover are being used together action is insulation protection .

Under the rated voltage,the splicing point temperature should not higher than the conductor temperature when through the max load electric current for long time.

The bimetallic parallel goroove clamps are designed to connect aluminumconductors and copper condcutors.Advanced forging technology enhances the mechanical strength of the clamp.