China splicing component Manufacturers Factory Suppliers

Insulation piercing connector is mainly suitable for the connection of the overhead insulation conductor, branch connection and grounding protection, It is used for the voltage which is 20KV, 10KV

The C type connector belongs to the field of non-load-bearing connectors in the power network, and is particularly suitable for the connection of the branch wires of the main line and the sub-line in

Description: Insulation Piercing Connector is suitable for aluminum and copper conductors and componentsnot losable, end cap attached to body, Insulation material made of weather resistant glass

The Compression Repair Sleeve is used to renovate the harmed conductor as connection fitting of resuming the latter's electric & mechanical performance.

The Compression Type Jumper Connector is jumper connection accessory between two busbars in power transmission facility.

JBTL series bimetal parallel groove clamp is suitable for unendurable force splicing and branch of the aerial wire. It has the function of protection and insulation when it matches insulating sheth.

Watertight mould for tapping services or mains with insulation piercing (FT) with 1 or 2 taps.This mould is to be used with our simultaneous tightening connectors type TTD as can use for separate tap

The lightning protection piercing connector is a product with a new structure. It is mainly installed on the load side of the line insulator. It has the protective function of preventing 10KV

Bolted Cable Lug does not need a hydraulic tool but a spanner to finish installation. The special design ensures perfect strength and electric conductivity.

Repair sleeves play an important role in maintaining the integrity of power transmission lines. These sleeves are used to repair a damaged section of a power line, preventing the need for costly and

The J type pg clamp belongs to shaped parallel groove clamp.The parallel groove clamp is used to connection of AAC or ACSR of small and medium-sized section and steel strand of overhead lightning

Copper-aluminium PG clamp is used for the Non-bearing connection and offset of aluminium stranded wire,copper core aluminium stranded wire,copper brand wire.