China Bolted Tension Clamp Manufacturers Factory Suppliers

The tension clamp is suitable for aerial line up to 220kV, fixing aluminium wire or steel core aluminium wire on the strain pole.

The Backup Clamp is suitable for aerial line up to 220kV, fixing aluminium wire or steel core aluminium wire on the strain pole.

The dead end clamps are used to anchor and tighten LV-ABC lines with insulated neutral messenger. These Clamps are easy to install with tools and suitable for various climatic conditions.

It is a kind of overhead power accessories and it's used to terminate 4-core of aerial bundle conductor. Its function is fixing and tightening the insulation conductor. The advantage of it is easy

The anchoring clamps are desgined for service line with 2 or 4 conductors.

The galvanized strain clamp(bolt type) is suitable for steel wires or cooper wires.

THA anchoring clamp is used to fix 2 or 4 core typically between the pole and the fascia board. The unique design of plastic clamp enables the cable direction to be a 90 degree opposite configuration

The bolt quantity of the tension clamp can be changed according to the customer's requirements.The clamp body and keepers are aluminum alloy, the cotter-pin is stainless steel, the other parts are

The Self-locking Dead End Clamp is a fitting used to fix conductor to bear the conductor tensile force and hing the conductor to tension clamp set or pole to tower.It can be divided into two types

The cotter pin of the wedge type strain clamp is stainless steel and the other parts are steel.All ferrous parts are hot-dip galvanized.

The low voltage Insulator spindle is forged in one piece from basic open hearth steel and provided with a square wrenching shoulder. These insulator spindle have a 1 inch ANSI standard cast lead

The compression dead end clamp is used to fix and connect conductor onto the tension insulator string or the fittings on pole and tower through sustaining tensile force generated by the conductor.