China specific tension range clamp Manufacturers Factory Suppliers

The Backup Clamp is suitable for aerial line up to 220kV, fixing aluminium wire or steel core aluminium wire on the strain pole.

The tension clamp of NLL series are generally called bolted type tension clamp or aluminium alloy gun type strain clamp,which are used for fixing aluminium wire or steel core aluminium wire on the

Tension clamp refers to the hardware used to fix the wire to bear the tension of the wire and hang the wire to the tension string or tower.

The series of wedge strain clamp are mainly used in the voltage rating of 1KV and below power insulated line.

It is a kind of overhead power accessories and it's used to terminate 4-core of aerial bundle conductor. Its function is fixing and tightening the insulation conductor. The advantage of it is easy

Side Open Tension Clamps are live line tools compatible for distribution tap connections.Bronze Alloy and Aluminum Alloy castings offer high strength, corrosion resistance, and conductor

The Metal Dead End Clamp is designed for service line with 2 or 4 conductors.These Dead End Clamps are easy to install without tools and suitable for various climatic conditions.

The Anchoring Clamp for Round Cable are designed to anchor LV-ABC lines with insulated neutral messenger. The clamp consists of an aluminum alloy open body with two self-adjusting insulating plastic

The anchoring fitting,is also known as tension clamp or fastened fitting,which is mainly used to fasten the terminal of wires to make it fixed in the tensile insulator string and anchor terminal of

The bolt quantity of the tension clamp can be changed according to the customer's requirements.The clamp body and keepers are aluminum alloy, the cotter-pin is stainless steel, the other parts are

The compression strain clamp is used to fix and connect conductor onto the tension insulator string or the fittings on pole and tower through sustaining tensile force generated by the conductor.

The compression dead end clamp is used to fix and connect conductor onto the tension insulator string or the fittings on pole and tower through sustaining tensile force generated by the conductor.