China Compression Terminal Connectors For Wires Manufacturers Factory Suppliers

Compression termical connectors are mainly used to connect the down leads of substation busbars to the outlet terminals of electrical equipment (such as transformers, circuit breakers, isolating

This bolted type T connecting is light and material saving and with good contact and installed conveniently.However,once installed,it can not be removed and is suitable for constructions of new built

The transformer connectors are used to connect tap conductor to transformer.

The bimetallic transformer connector is used for earthing system of power plant ,transformer station ,tower ,communication station ,airport, railway, subway station , high building ,computer room

The bimetallic transition terminal connector is used for the electrical connection of aluminum and copper materials.

Compression T connector refers to a piece of hardware that connects conductors and branch lines to transmit electrical loads and withstand certain mechanical loads.

Terminal connector is mainly usd for connection between downlead with terminal lugs of electrical equipment (such as transformers, sircuit breakers, isolation switch, wall casing wear, etc.)

Bimetal Transition Terminal Connectors play a critical role in power substations. They are essential components that allow for efficient and reliable power transmission for a range of electrical

Bolted Copper Lug is made of brass by die-cast and coated nickle,which is fixed by bolts and used in the connections between the electrical equipment with cable and the indoor distribution equipment.

The pole holding end of pole holding clamp adopts screw and side seam design,the clamp is installed behind conducting rod of equipment and then tight up the screw in the two side of seam,the other

The Lightning protection piercing clamp is composed of reinforced shell,piercing blade,sealed plate,waterproof silicone grease, high strength bolt, torque nut and cable terminal cap cover.

The Bi-metal Terminal Connector is used for connection of power transmission.It is a integrated no solder structure composed of aluminium plate and copper plate set in the lower half of aluminium