China rust proof link fitting Manufacturers Factory Suppliers

Link fitting are used to link clamps to insulator,or to link insulator and ground wire clamps to arms or subjection strutures.

The Forged ball clevis is used to attach ball and socket insulators to other associated hardware.

The y type socket clevis is usually used for suspension strings and tension strings in line hardware.

As one of Link fitting, the extension Y clevis is used to link other fittings in tension strings.

The Hot-dip Galvanized U Type Shackle is an nonstandard part and its sharp is U Type.The thread in the two ends can be combined with nut.

The eyelet rigging thimble is mainly used together with preformed tension clamp to wrap steel strand or used as gasket for steel wire rope.

The U type clamp is used to connect ground rod in lightning protection and grounding system with conductors like cables.The U type clamp has attractive appearance, good antiseptic property and can

Foundation bolts can be divided into fixed anchor bolts, movable foundation bolts, expansion foundation bolts and adhesive foundation bolts, which also can be divided into l-type embedded bolts,

The ball eye is a iron round fitting used to connect insulated suspension piece,bearing mechanical load.

The eye nut is solid forged and made after normalizing treatment and scale handling.It must be installed vertically on the work piece plane,the adjoining plane should be flat and tight and adjusted

The cotter pin of the tower connection clevis for overhead electric power lines is stainless steel,the other parts are hot-dip galvanized steel.

The cotter pin of the connecting hanging clevis is stainless steel,the other parts are hot-dip galvanized steel.