China pipe splicing flange Manufacturers Factory Suppliers

Insulation piercing connector is mainly suitable for the connection of the overhead insulation conductor, branch connection and grounding protection, It is used for the voltage which is 20KV, 10KV

CTO Type Aluminum Cable Connector is suitable for branching identical cross-sections and no need to split the main conductor.

The C type connector belongs to the field of non-load-bearing connectors in the power network, and is particularly suitable for the connection of the branch wires of the main line and the sub-line in

JBTL series bimetal parallel groove clamp is suitable for unendurable force splicing and branch of the aerial wire. It has the function of protection and insulation when it matches insulating sheth.

Aluminum Parallel groove clamp is mainly used for composite ground wire(OPGW) cable or the safety of the earth wire grounding to improve the reliability of the grounding system.

The Bimetallic PG Clamp is applied for non-bearing connection of conduction and branch,which is usually used with insulating cover to play a role of insulating and protecting.

The C-type clamps are mainly used for 20KV overhead insulated conductors, aluminum stranded wires, steel-cored aluminum stranded wires, steel stranded wires and copper wires in non-stressed positions

This type Compression Terminal Clamps for Double Wire are applicable to connect copper conductor with aluminum terminal of electric device, qualified for good electric contact performance suitable

The splicing sleeves for ACSR are used for splicing or repairing of aerial conductor and ground wire of transmission line.

The outer splicing of mid span joint is aluminium,the inner sleeve is hot-dip galvanized steel.

Under the rated voltage,the splicing point temperature should not higher than the conductor temperature when through the max load electric current for long time.

H-type connectors are generally used in the crimp connection of jumpers, branch wires, lead wires, household wires, and house wires of overhead high-voltage and low-voltage power line towers.