China post link fitting Manufacturers Factory Suppliers

The turnbuckle is also called turn buckle,which is a wire rope clamp used to bind and fasten steel wire rope.

The twisted u shackle is one of the general power fittings used in overhead power transmission line.It is forged by hot-dip galvanized round steel,which can be single or series widely used.

The Thimble Clevis is used to connect the preformed helical tension clamp and other link fittings together, so that the whole string is connected to the pole.

The socket tongue is made of hot-dip galvanized steel. Security clip is stainless steel, the cotter pin is stainless steel.

The shape of LF type yoke plate is just like a rectangle in which an oval hole is located in the middle position; it is used for connection between two pieces of separate conductors subjected to

The rounded U shaped design of anchor shackles allows them to take loads from many directions without developing significant side load. The screw pin allows for easy attachment and detachment with a

Ball clevis is a connecting component composed of ball foot and ring,which is used to connect socket of steel cap in the upper end of ball socket type suspension insulators to form insulator

The socket tongue is used to suspend the insulator string and the hanging clip, and bears a large working stress, and its safety performance is very important for the transmission line.

The eye nut is mainly used in lock steel wire,steel tube and other types mechanical combination

The U bolt, is also known as U-bolts,which is an nonstandard part and its sharp is U Type.The thread in the two ends can be combined with nut.It is called U bolt for the way of fixing item like a man

The yoke plate is suitable for assembling the suspension insulator to string, and it is also used for connection of one or several strings insulator and then suspending on the pole arm of perch as

Breaking Load of D Anchor Shackle:70KN,120KN,160KN,210KN,250KN. The cotter pin of D Anchor Shackle is stainless steel,the other parts are hot-dip galvanized steel.