China pipe splicing supply Manufacturers Factory Suppliers

The copper cable terminal is an appliance that connects the copper terminal and the wire with a special crimping pliers at the end of the wire in order to ensure reliable and convenient wiring in the

Bimetallic Bolted Mid Span Joint is mainly used for splicing connections between insulated wires, aluminum stranded wires, aluminum alloy stranded wires, and steel-cored aluminum stranded wires at

The Compression Repair Sleeve is used to renovate the harmed conductor as connection fitting of resuming the latter's electric & mechanical performance.

The c copper connector has the advantages of simple construction, small occupation area, long service life, no environmental pollution and low resistance value,etc..

All Kinds Of Brass Parallel Groove Clamp are suitable for using copper wire as conductor in the earthing system,fixing the copper wire on the earth rod.which is made of brass material,match with

Watertight mould for tapping services or mains with insulation piercing (FT) with 1 or 2 taps.This mould is to be used with our simultaneous tightening connectors type TTD as can use for separate tap

The lightning protection piercing connector is a product with a new structure. It is mainly installed on the load side of the line insulator. It has the protective function of preventing 10KV

The J type pg clamp belongs to shaped parallel groove clamp.The parallel groove clamp is used to connection of AAC or ACSR of small and medium-sized section and steel strand of overhead lightning

The C-type clamps are mainly used for 20KV overhead insulated conductors, aluminum stranded wires, steel-cored aluminum stranded wires, steel stranded wires and copper wires in non-stressed positions

Copper-aluminium PG clamp is used for the Non-bearing connection and offset of aluminium stranded wire,copper core aluminium stranded wire,copper brand wire.

H Type Tap Connector is suitable for non-load-bearing splices and branches of conductors in overhead lines. H Type Tap Connector can be equipped with an optional insulation cover to provide

The outer splicing of mid span joint is aluminium,the inner sleeve is hot-dip galvanized steel.