China Aluminium Alloy T Connector Manufacturers Factory Suppliers

Tubular bus-bar joint is a metal accessory made of iron or aluminium,which is widely used in power transmission and distribution line.

Its down wire terminal is single plate, suitable for down lead arrangement.

It is suitable for the connection of the inlet and outlet of the conductive column of the transformer and other equipment.

The Cable Cleat is made of high-strength anti-corrosive aluminum alloy to secure the placement of 3 cables.

This type Compression Terminal Clamps for Double Wire are applicable to connect copper conductor with aluminum terminal of electric device, qualified for good electric contact performance suitable

Compression T connector refers to a piece of hardware that connects conductors and branch lines to transmit electrical loads and withstand certain mechanical loads.

Terminal connector is mainly usd for connection between downlead with terminal lugs of electrical equipment (such as transformers, sircuit breakers, isolation switch, wall casing wear, etc.)

It is a copper-aluminum transition plate for power transmission connection, including an aluminum substrate, a copper layer is provided on the lower half of the substrate surface, and the copper

TLG type brazing aluminum T terminal clamp is adopted bolts for firmly fixing conductor in which the clamp and gland (other parts consist of hot dip galvanized steel) are made up of copper and

The Lightning protection piercing clamp is composed of reinforced shell,piercing blade,sealed plate,waterproof silicone grease, high strength bolt, torque nut and cable terminal cap cover.

Aluminum Alloy T Connector is suitable for overhead transmission line or branch connection of 10KV overhead insulating cable. It consists of main body, main line gland, branch line gland and bolts.

The Bi-metal Terminal Connector is used for connection of power transmission.It is a integrated no solder structure composed of aluminium plate and copper plate set in the lower half of aluminium