China pipe splicing hardware Manufacturers Factory Suppliers

There is no need to remove the insulator skin of cable to make the cable branch.The main cable do not need to be cut down,the branch can be made at any place of the cable as the joint is completely

Compression H tap connector is used for non-load-bearing connection and branching of conductors in overhead lines. The product can be equipped with an optional insulation cover for protective

The C type Clamp is made of high strength alloy of elasticity with good electrical conductivity and according to different specifications of wires, it is designed with a specific shape of wire groove

The C type connector belongs to the field of non-load-bearing connectors in the power network, and is particularly suitable for the connection of the branch wires of the main line and the sub-line in

Our PG clamps are divided into: Aluminium PG clamp, Copper PG clamp, Bimetallic PG clamp.

The Compression Repair Sleeve is used to renovate the harmed conductor as connection fitting of resuming the latter's electric & mechanical performance.

The parallel clamp for AAC & ACSR Conductor are suitable for connecting suspension insulators into a string and hang the string in tower or  connect strain clamp and insulator string in the straight

Guy Wire Parallel Groove Clamp is used for the fixation of steel strand terminals in power lines, the fixation of stay wire terminals, the fixation of diagonal stay wires, etc.

The copper cable terminal is an appliance that connects the copper terminal and the wire with a special crimping pliers at the end of the wire in order to ensure reliable and convenient wiring in the

Watertight mould for tapping services or mains with insulation piercing (FT) with 1 or 2 taps.This mould is to be used with our simultaneous tightening connectors type TTD as can use for separate tap

Copper-aluminium PG clamp is used for the Non-bearing connection and offset of aluminium stranded wire,copper core aluminium stranded wire,copper brand wire.

H-type connectors are generally used in the crimp connection of jumpers, branch wires, lead wires, household wires, and house wires of overhead high-voltage and low-voltage power line towers.