China pipe splicing rim Manufacturers Factory Suppliers

Watertight mould for tapping services or mains with insulation piercing (FT) with 1 or 2 taps.This mould is to be used with our simultaneous tightening connectors type TTD as can use for separate tap

Oval Copper Crimp Sleeve(oil plugging) are suitable for the connection of copper conductors (section 16-500mm2) in power cable with electronic equiment.

Copper parallel groove clamps are contact fittings that connect wires in parallel to transfer electrical loads. They are widely used, such as jumpers for non-straight poles and towers, T-wiring at

The Compression Type Jumper Connector is jumper connection accessory between two busbars in power transmission facility.

The copper split bolted connector is suitable for the sequence and transportation of conductor in electricnetting, made of copper. Split-bolt has free-running threads and easy to grip wrench flats.

All Kinds Of Brass Parallel Groove Clamp are suitable for using copper wire as conductor in the earthing system,fixing the copper wire on the earth rod.which is made of brass material,match with

The Down Leading clamp is uswd to fix the cable to splice pole/tower and terminal pole/tower in the down-lead to the closure.

Power accessories Aluminum parallel groove clamp,which is called PG clamp, is designed to connect two parallel bare conductors which can be aluminum alloy or aluminum steel reinforced.

The Bimetallic PG Clamp is applied for non-bearing connection of conduction and branch,which is usually used with insulating cover to play a role of insulating and protecting.

The galvanized guy clamp is used for connecting or branching steel wires.

Parallel Groove PG Clamp is used in the connecting of Aluminum cable, Steel cored Aluminum cable or overhead ground wire strand for small and medium-size section at the position of not under tension,

This series insulation piercing connector is mainly used for wire branching The applicable voltage is 10kV, 1kV and less more than 1kV.