China ODM Eyelet Rigging Thimble Manufacturers Factory Suppliers

The eyelet rigging thimble is mainly used together with preformed tension clamp to wrap steel strand or used as gasket for steel wire rope.

The Forged ball clevis is used to attach ball and socket insulators to other associated hardware.

The twisted u shackle is one of the general power fittings used in overhead power transmission line.It is forged by hot-dip galvanized round steel,which can be single or series widely used.

The Hot-dip Galvanized U Type Shackle is an nonstandard part and its sharp is U Type.The thread in the two ends can be combined with nut.

The socket eye for overhead transmission power line is malleable iron, hot-dip galvnized and the ecurity clip is stainless steel.

Link fitting is used in connection between insulator chain and pole tower,insulator chain and other power fittings and insulators,which bearing mechanical load and composed of specialized link

The cotter pin of hanging clevis is stainless steel, the other parts are hot-dip galvanized steel.

Link fittings are fittings used to connect insulators,suspension clamp,tension clamp and protective fitting to assemble suspension or tension set.

The eye nut is solid forged and made after normalizing treatment and scale handling.It must be installed vertically on the work piece plane,the adjoining plane should be flat and tight and adjusted

The Clevis Tongue is made of hot-dip galvanized steel which is used for overhead transmission line as a connecting clevis.The link fittings are used for the connection and combination of

The cotter pin of the connecting hanging clevis is stainless steel,the other parts are hot-dip galvanized steel.

U type bolt only applicable for using on earthing wire and small section area conductors as a link fitting.The material is hot-dip galvanized steel,the security clip is stainless steel.