China assembly fittings Manufacturers Factory Suppliers

The cotter pin is stainless steel, the other parts are hot-dip galvanized steel.

The hang clevis is used for the connectiong and combination of insulators, suspension clamps, strain clamps and protective fittings, to form a string set of suspension or strain fittings.

The Hot-dip Galvanized U Type Shackle is an nonstandard part and its sharp is U Type.The thread in the two ends can be combined with nut.

Eye Slip Hooks are commonly used in industrial, agricultural, and automotive settings for securing loads, lifting heavy equipment, and other applications where a strong and reliable connection point

Link fittings are mainly used in power transmission line or substation,string assembly of insulators,connection of serial insulator chains,connection of wires and lightning clamps and connection of

The Y type ball clevis is used to combine insulators, suspension clamps, strain clamps and protective fittings into suspension or strain resistance. This exquisite component, despite its small size,

The shape of LF type yoke plate is just like a rectangle in which an oval hole is located in the middle position; it is used for connection between two pieces of separate conductors subjected to

The U bolt, is also known as U-bolts,which is an nonstandard part and its sharp is U Type.The thread in the two ends can be combined with nut.It is called U bolt for the way of fixing item like a man

Ball hook are used to link clamps to insulator, or to link insulator and ground wire clamp to tower arms or subjection structure.

The socket eye is made of hot-dip galvanized steel. The security clip is stainless steel and the cotter pin is stainless steel.

Breaking Load of D Anchor Shackle:70KN,120KN,160KN,210KN,250KN. The cotter pin of D Anchor Shackle is stainless steel,the other parts are hot-dip galvanized steel.

The Ball Tongue Clevis for overhead transmission power line is made of hot-dip galvanized steel.The sizes can be designed according to requirements.