China New Product Galvanized Downleading Clamp Manufacturers Factory Suppliers

The down lead clamp is used in rivet the fiber when jumping or down lead , and it was commonly installed every 1.5 to 2 meter each set .

A live working clamp is a clamp used to connect wires and live circuit wires. It belongs to the field of power special tools. Widely used in 10KV live work, disconnection and fire work, the range of

The body of Two Bundles Spacer Damper, keepers and bracket are aluminium alloy, dampers are elastomer, the other parts are hot-dip galvanized steel.

spacer damper is needed to be installed on the interval among different spans. Moreover, the installation of spacer damper will be also helpful to remove the swing on span and aero vibration.

The high strength ground wire clamp is used for joining copper bond threaded earth rods together.

The resuable threaded driving heads are suitable for driving copper bond threaded earth rods by hand or with o power hammer.The driving head screws into the threaded coupling to allow deep driving of

The protective fitting is used as itself or matching with other various types electric installation,which plays a role of protection for electrical performance or mechanical performance.Moreover,It

Two Split spacer dampers help to prevent electrical arcing. This occurs when two cables come into contact with each other and create a spark. If left unaddressed, arcing can cause serious damage to

The counter weight is one of protecting fittings which is used in the circumstance of insufficient distance of suspension insulators chain in straight line pole or between jumper connectors in

Spacer Damper For Double Cable are essential components in electrical power lines that prevent the fatigue damage caused by vibration. These devices are installed in between the conductor and support

The clamp of Vibration Damper for Conductor is aluminum alloy,counter weights are grey iron,the other parts are hot-dip galvanized steel.

The clamp of Galvanized Stockbridge Vibration Damper is aluminum alloy,counter weights are grey iron,the other parts are hot-dip galvanized steel.It is designed to reduce the vibration of the wire