China Zinc Plating Wire Rope Clamp Manufacturers Factory Suppliers

The clip body of Wire Rope Clamp is malleable iron and the other parts are zinc plating coloring steel.

The clamp body and wedge are malleable iron,the other parts are hot-dip galvanized steel.Thief-proof equipment can be supplied if it is needed.

The Wire Rope Clips is a guy wire fitting and mainly used for temporary connection and fixing of steel wire ropes.

The NUT Wedge Clamp consists of a body of hot-dip galvanized malleable iron,  wedges and hot-dip galvanized steel component.

Stay Wire Clamp is used for telco and CATV aerial plant to terminate and hold the end of the lashing wire, either at an interruption in continuity or at the end of the lashing wire coil.

Lashing Wire rope Clamp is used for telco and CATV aerial plant to terminate and hold the end of the lashing wire, either at an interruption in continuity or at the end of the lashing wire coil.

The cross joint is used to fix the wire on pole.Good electrical conductivity.

The wire rope clip is hot-dip galvanized, it is used to fix the steel wire rope.

The Wire Rope Clamp body is malleable iron and the other parts are hot-dip galvanized steel.

The function of the stay rod is that when only one side of the pole is wired, the power will be unbalanced. In order to achieve balance, the end without wires needs to be fixed by a wire rope, one

The U channel steel is a strip shape rolled steel with groove shape section.It is a kind of carbon structural steel for construction and mechanical use and a profiled steel with complex sections,of

The stay rod is used for installation of galvanized iron wire strands as well as fixture of overhead ground wire and guy grip on guy-strained tower; it makes use of arm force subjected to the wedge