China fitting splicing lot Manufacturers Factory Suppliers

The copper-aluminium bimetallic cable lugs are suitable for transition connection of the circular aluminium wires, hemicycle-sector aluminum wires, power supply cables in the distribution equipment

The C type connector belongs to the field of non-load-bearing connectors in the power network, and is particularly suitable for the connection of the branch wires of the main line and the sub-line in

Copper parallel groove clamps are contact fittings that connect wires in parallel to transfer electrical loads. They are widely used, such as jumpers for non-straight poles and towers, T-wiring at

The Compression Repair Sleeve is used to renovate the harmed conductor as connection fitting of resuming the latter's electric & mechanical performance.

The Adjustable PG Clamp is used to connect two parallel bare conductors.And the conductors can be aluminium alloy or aluminium steel reinforced and copper conductor.

Waterproof Piercing Clamp are mainly composed of insulating shell, piercing blade, waterproof rubber pad, and torque bolt.

When the distribution overhead line is aluminum wire, and the lead wire is copper wire, it is Use a copper-aluminum parallel groove clamp, because the direct connection of copper-aluminum will cause

Our PG clamps are divided into: Aluminium PG clamp, Copper PG clamp, Bimetallic PG clamp. The parallel groove clamp is suitalbe for unendure force splicing and branch on the aerial wire, being used

The J type pg clamp belongs to shaped parallel groove clamp.The parallel groove clamp is used to connection of AAC or ACSR of small and medium-sized section and steel strand of overhead lightning

The C-type clamps are mainly used for 20KV overhead insulated conductors, aluminum stranded wires, steel-cored aluminum stranded wires, steel stranded wires and copper wires in non-stressed positions

The bimetallic Al-Cu parallel groove clamp is a widely used contact fitting to transfer electric load and parallel wires.The splicing of jumper wire for non-linear tower,branch

H-type connectors are generally used in the crimp connection of jumpers, branch wires, lead wires, household wires, and house wires of overhead high-voltage and low-voltage power line towers.