China brass splicing fitting Manufacturers Factory Suppliers

The Down Leading clamp is uswd to fix the cable to splice pole/tower and terminal pole/tower in the down-lead to the closure.

CTO Type Aluminum Cable Connector is suitable for branching identical cross-sections and no need to split the main conductor.

The Bolted Type C Connector is made of high strength alloy of elasticity with good electrical conductivity and according to different specifications of wires, it is designed with a specific shape of

The c copper connector has the advantages of simple construction, small occupation area, long service life, no environmental pollution and low resistance value,etc..

This tape fixing clamp is used to tightly connect the wire and the rod together.

The J type pg clamp belongs to shaped parallel groove clamp.The parallel groove clamp is used to connection of AAC or ACSR of small and medium-sized section and steel strand of overhead lightning

The terminal connector is generally used to connect terminal outgoing lines of busbar downlead and electrical equipment(Such as transformer,breaker,mutual inductor,disconnecting switch and wall

This type Compression Terminal Clamps for Double Wire are applicable to connect copper conductor with aluminum terminal of electric device, qualified for good electric contact performance suitable

Copper-aluminium PG clamp is used for the Non-bearing connection and offset of aluminium stranded wire,copper core aluminium stranded wire,copper brand wire.

H Type Tap Connector is suitable for non-load-bearing splices and branches of conductors in overhead lines. H Type Tap Connector can be equipped with an optional insulation cover to provide

The outer splicing of mid span joint is aluminium,the inner sleeve is hot-dip galvanized steel.

The Aluminium Compression Tap Connector is generally used in connection of jumper wires,branch lines,lead wires,service mains and other wires on the tower in overhead high-voltage and low-voltage