China energy storage suspension clamp Manufacturers Factory Suppliers

The suspension clamp is used to fix the wire on the insulator string of the tower, or hang the lightning protection line on the tower.

The body and keepers of the suspension clamp are aluminium alloy,of which the cotter-pin is stainless steel and the other parts are hot-dip galvanized steel.

The suspension clamp is used to fix the wire on the insulator string of the tower, or hang the lightning protection line on the tower.

The suspension clamp is used to fix the wire on the insulator string of the tower, or hang the lightning protection line on the tower.

The Aluminium Alloy Suspension Clamp is used to fix the wire on the insulator string of the tower, or hang the lightning protection line on the tower.

The Suspension clamps are primarily used to fix conductors to insulator strings or hang lightning conductors on straight line towers.

CSH & XCS type twin conductor aluminum alloy suspension clamps are adopted malleable iron casting & aluminum alloy, especially suitable for more than 110KV overhead transmission line; the main body &

High stength suspension clamp is a fitting for suspending a wire to a string of suspension insulators or a string of fittings.

The suspension clamp body and keepers are malleable iron, cotter-pins are stainless steel, the other parts are steel. All ferrous parts are hot-dip galvanized.Application:

Suspension clamps are used to connect the conductors to the insulators. The body of Suspension clamps is made of aluminium alloy,other parts are made of hot-dip galvanized steel.

Aluminum Trunninon Suspension Clamp: Both wires and lightning wires can be used in this kind of wire clamp,which can bear the installation load of wires within the vertical spacing and the wire clamp

The dimensions of suspension clamp and clevis can be customized.The suspension clamp for power fitting line is suitable for conductor 14-21mm,the U.T.S is 80KN.The parallel clevis suspension clamp