Aluminum Trunninon Suspension Clamp

Description:
Aluminum Trunninon Suspension Clamp: Both wires and lightning wires can be used in this kind of wire clamp,which can bear the installation load of wires within the vertical spacing and the wire clamp is not allowed to slide or get away from the insulator string when the line is running normally or broken.The tower with this clamp has a high load pressure.

Wear Precautions:

1. In order to prevent the wear of the lightning conductor, the size of the ship type wire clamps should be selected according to the section of the lightning conductor, and the aluminum tape for the lightning conductor at the suspension clamp should be wrapped and the lightning conductor should be tightly packed in accordance with the technical requirements in the construction strictly.

2. 
   

2.In the circuit design, only the load of metal is required, while other strength parameters are not required for inspection. Therefore, in the areas with strong wind and large wind deflection, when selecting the suspension clamp for the circuit design and construction, wear-resistant wire clamp (such as various alloy types) and the suspension clamp with wind deflection components should be considered.

Hot Tags: Aluminum Trunninon Suspension Clamp, China, manufacturers, suppliers, factory, customized, H D G Suspension Clamp, Galvanized J Hook, SHC Suspension Clamp, Suspension Clamp Set, Cable Suspension Clamp, Insulated Suspension Clamp