Suspension Clamp with Parallel Clevis

Descriptions:

The dimensions of suspension clamp and clevis can be customized.The suspension clamp for power fitting line is suitable for conductor 14-21mm,the U.T.S is 80KN.The parallel clevis suspension clamp body and keepers are aluminum alloy,the cotter-pin is stainless steel,the other parts are hot-dip galvanized steel.The suspension clamp can withstand the installation load of the wires in the vertical span,and does not allow the clamp to slide or disengage from the insulator string when the line is in normal operation or disconnected.The load of the tower using the suspension clamp is large.

Application:

The suspension clamp is used to fix the wire on the insulator string of the tower,or hang the lightning protection line on the tower.

Structure features:

- High-strength suspension clamp can bear the stress of line.

- According to the relative position between the center of gyration axle and the axis of conductor,suspension clamps can be divided into trunnion type,hang-down type and carried-up type.

- Based on the requirement for grip strength of suspension clamp to conductor,the suspension clamp can be divided into three types: Fixed type,slip type and limited grip strength type.

- Generally,malleable cast iron,steel and aluminum alloy are used as it's materials.

Hot Tags: suspension clamp with parallel clevis, China, manufacturers, suppliers, factory, customized, Suspension Clamp Set, Suspension Clamp For Power Line, Suspension Clamp With U Clevis, Suspension Clamp With Bracket for export, XGH Type Suspension Clamp, Hot dip Galvanized Suspension Clamp