China Compression Equipment Terminal Connector Manufacturers Factory Suppliers

Hydraulic Terminal Connectors are used to connect cables or wires to prevent wires from loosening or breaking due to vibration or other factors in the equipment, thereby providing more stable and

Compression termical connectors are mainly used to connect the down leads of substation busbars to the outlet terminals of electrical equipment (such as transformers, circuit breakers, isolating

Its down wire terminal is single plate, suitable for down lead arrangement.

The body of Compression Tee Connector is aluminium, the other parts are hot-dip galvanized steel.

The bimetallic transition terminal connector is used for the electrical connection of aluminum and copper materials.

Equipment Terminal Clamp is used for earthing system of power plant ,transformer station ,tower ,communication station ,airport, railway, subway station , high building ,computer room ,oil reservoir

The wire rope connector is hot-dip galvanized.

The Tee Connectors are fittings that connect wires and branch wires to transmit electrical loads and bear certain mechanical loads. High-voltage transmission lines are channels for connecting

Tubular bus-bar joint is a metal accessory made of iron or aluminium,which is widely used in power transmission and distribution line.

The pole holding end of pole holding clamp adopts screw and side seam design,the clamp is installed behind conducting rod of equipment and then tight up the screw in the two side of seam,the other

The Lightning protection piercing clamp is composed of reinforced shell,piercing blade,sealed plate,waterproof silicone grease, high strength bolt, torque nut and cable terminal cap cover.

The Terminal Connector for Substation Equipment is mainly used for connections between down-leads with terminal lugs of electrical equipment,such as transformers,circuit breakers,isolation