China pipe splicing connector Manufacturers Factory Suppliers

This series insulation piercing connector is mainly used for wire branching The applicable voltage is 10kV, 1kV and less more than 1kV.

Copper parallel groove clamps are contact fittings that connect wires in parallel to transfer electrical loads. They are widely used, such as jumpers for non-straight poles and towers, T-wiring at

Circuit Breaker Universal Clamp is mainly suitable for connecting wires to the incoming and outgoing terminals of electrical equipment (such as circuit breakers, isolating switches, fuses, load

Earthing PG Clamp is suitable for grounding connections and high-voltage line discharge connections in overhead insulated lines of 20kV and below. Earthing PG Clamp is used in conjunction with the

This tape fixing clamp is used to tightly connect the wire and the rod together.

Watertight mould for tapping services or mains with insulation piercing (FT) with 1 or 2 taps.This mould is to be used with our simultaneous tightening connectors type TTD as can use for separate tap

The insulated piercing clamp is composed of reinforced shell,piercing blade,sealed plate,waterproof silicone grease, high strength bolt, torque nut and cable terminal cap cover.

The insulated terminal is one of the power transmission line accessories to realize electrical connection.

it is a kind of accessories for electrical connections.We supplies a full range of cable lugs to satisfy different demand with premium quality.There must be one meets your criteria.

The outer splicing of mid span joint is aluminium,the inner sleeve is hot-dip galvanized steel.

The bimetallic parallel goroove clamps are designed to connect aluminumconductors and copper condcutors.Advanced forging technology enhances the mechanical strength of the clamp.

The Aluminium Compression Tap Connector is generally used in connection of jumper wires,branch lines,lead wires,service mains and other wires on the tower in overhead high-voltage and low-voltage