China angled link fitting Manufacturers Factory Suppliers

The turnbuckle is one of the link fittings for power transmission line.it is hot-dip galvanized steel and composed of left and right hand thread adjustment rod,nut and pull rod,of which the

The clevis&togue steel plate pole cable fitting U clevis tongue is made of Hot-dip galvanized steel. It is used with bands in pole installations and with screws in wall installations.

The hang clevis is used for the connectiong and combination of insulators, suspension clamps, strain clamps and protective fittings, to form a string set of suspension or strain fittings.

The extension ring is used for connection between insulator strings and fittings, between clamps and insulator strings, between lightning rod and tower.

Socket tongue is an important component of electric power transmission lines. It serves the purpose of connecting the insulator to the cross-arm or the pole. It acts as a support system for the wire,

The lifting hook is the most common type of spreader in hoisting machinery. The lifting hook is often suspended on the wire rope of the hoisting mechanism by means of pulley blocks and other

In order to make link fittings with the same mechanical strength take Universal interchangeability and overhaul conveniently,the pin for link fittings,diameter,size and force of bolt with the same

The insulator is generally used in wire pole and made of glass or ceramics in the early years.In order to increase creep distance,it develops into discoid insulators hang in one end of high voltage

The eye nut is solid forged and made after normalizing treatment and scale handling.It must be installed vertically on the work piece plane,the adjoining plane should be flat and tight and adjusted

The Socket Clevis are malleable iron or casting steel,these purity clips are bronze or stainless steel,cotter pins are stainless,ferrous parts are hot-dip galvanize steel.

The cotter pin of the tower connection clevis for overhead electric power lines is stainless steel,the other parts are hot-dip galvanized steel.

The ball clevis for overhead transmission line is made of hot-dip galvanized steel.The sizes can be designed according to requirements.