Substation Fitting

It is a copper-aluminum transition plate for power transmission connection, including an aluminum substrate, a copper layer is provided on the lower half of the substrate surface, and the copper

Bimetal Transition Terminal Connectors play a critical role in power substations. They are essential components that allow for efficient and reliable power transmission for a range of electrical

Aluminum Tee Connectors are fittings that connect wires and branch wires to transmit electrical loads and bear certain mechanical loads. High-voltage transmission lines are channels for connecting

TLG type brazing aluminum T terminal clamp is adopted bolts for firmly fixing conductor in which the clamp and gland (other parts consist of hot dip galvanized steel) are made up of copper and

Tubular bus-bar joint is a metal accessory made of iron or aluminium,which is widely used in power transmission and distribution line.

Bolted Copper Lug is made of brass by die-cast and coated nickle,which is fixed by bolts and used in the connections between the electrical equipment with cable and the indoor distribution equipment.

The standard Tubular busbar Clamp is made of aluminum alloy is fixed on the single or double tensile insulator string by two tensile clamps through the tubrlar busbar.

The pole holding end of pole holding clamp adopts screw and side seam design,the clamp is installed behind conducting rod of equipment and then tight up the screw in the two side of seam,the other

The insulated piercing clamp is composed of reinforced shell,piercing blade,sealed plate,waterproof silicone grease, high strength bolt, torque nut and cable terminal cap cover.

The Lightning protection piercing clamp is composed of reinforced shell,piercing blade,sealed plate,waterproof silicone grease, high strength bolt, torque nut and cable terminal cap cover.

Aluminum Alloy T Connector is suitable for overhead transmission line or branch connection of 10KV overhead insulating cable. It consists of main body, main line gland, branch line gland and bolts.

The cable lug is used for connection and continuation in the end of cable to make the cable and electric appliance more tight and safe connected,which is the common material used in