Splicing Fitting

it is a kind of accessories for electrical connections.We supplies a full range of cable lugs to satisfy different demand with premium quality.There must be one meets your criteria.

Insulation piercing connector is mainly suitable for the connection of the overhead insulation conductor, branch connection and grounding protection, It is used for the voltage which is 20KV, 10KV

H Type Tap Connector is suitable for non-load-bearing splices and branches of conductors in overhead lines. H Type Tap Connector can be equipped with an optional insulation cover to provide

The splicing sleeves for ACSR are used for splicing or repairing of aerial conductor and ground wire of transmission line.

The outer splicing of mid span joint is aluminium,the inner sleeve is hot-dip galvanized steel.

The bimetallic Al-Cu parallel groove clamp is a widely used contact fitting to transfer electric load and parallel wires.The splicing of jumper wire for non-linear tower,branch

AS a splicing fitting,the parallel groove clamp for transmission power line is suitable for unending force splicing and branch on the aerial wire,being used with insulation cover.Its action is

Aerial insulation aluminium conductor and insulation aluminium cover are being used together action is insulation protection .

Under the rated voltage,the splicing point temperature should not higher than the conductor temperature when through the max load electric current for long time.

The bimetallic parallel goroove clamps are designed to connect aluminumconductors and copper condcutors.Advanced forging technology enhances the mechanical strength of the clamp.

The Aluminium Compression Tap Connector is generally used in connection of jumper wires,branch lines,lead wires,service mains and other wires on the tower in overhead high-voltage and low-voltage

H-type connectors are generally used in the crimp connection of jumpers, branch wires, lead wires, household wires, and house wires of overhead high-voltage and low-voltage power line towers.