China typical tension clamp Manufacturers Factory Suppliers

This new type tension clamp is composed of wedge-shaped holder and wedge-shaped clamp fit the shape of the inner hole in the holder set in the clamp body and lining sleeve.

The tension clamp of NLL series are generally called bolted type tension clamp or aluminium alloy gun type strain clamp,which are used for fixing aluminium wire or steel core aluminium wire on the

The dead end clamps are used to anchor and tighten LV-ABC lines with insulated neutral messenger. These Clamps are easy to install with tools and suitable for various climatic conditions.

Tension clamp refers to the hardware used to fix the wire to bear the tension of the wire and hang the wire to the tension string or tower.

The strain clamp body and keepers are malleable iron, the cotter-pin is stainless steel, the other parts are hot-DIP galvanized steel. This type strain clamp is customized for exporting.

A type of wire clamp, which is widely used to support telephone drop wire at span clamps, drive hooks and various drop attachments.

The bolt quantity of the tension clamp can be changed according to the customer's requirements.The clamp body and keepers are aluminum alloy, the cotter-pin is stainless steel, the other parts are

The Self-locking Dead End Clamp is a fitting used to fix conductor to bear the conductor tensile force and hing the conductor to tension clamp set or pole to tower.It can be divided into two types

which are insulating protective fittings to fix aluminum wire or steel core aluminum wire on the strain pole and used in aerial insulation aluminum conductor and insulation aluminum cover.

The body and keepers of aluminium bolted type tension clamp are malleable iron,cotter-pins are stainless steel and the other parts are steel.All ferrous parts are hot-dip galvanized.

The low voltage Insulator spindle is forged in one piece from basic open hearth steel and provided with a square wrenching shoulder. These insulator spindle have a 1 inch ANSI standard cast lead

The compression dead end clamp is used to fix and connect conductor onto the tension insulator string or the fittings on pole and tower through sustaining tensile force generated by the conductor.