China splicing tee Manufacturers Factory Suppliers

There is no need to remove the insulator skin of cable to make the cable branch.The main cable do not need to be cut down,the branch can be made at any place of the cable as the joint is completely

Hydraulic Jumper Connectors are used to bridge two electrical components in a circuit, thereby providing a continuous flow of current. They are designed to withstand high voltage and current loads,

The C type connector belongs to the field of non-load-bearing connectors in the power network, and is particularly suitable for the connection of the branch wires of the main line and the sub-line in

The Bolted Type PG Clamp is suitalbe for unendure force splicing and branch on the aerial wire, being used with insulation cover.

The copper split bolted connector is suitable for the sequence and transportation of conductor in electricnetting, made of copper. Split-bolt has free-running threads and easy to grip wrench flats.

Down lead clamp is used to lead cable down from the tower or pole in order to protect the cable from wear with tower or pole.Down lead is mainly used for ADSS and OPGW fixture in tower on cable fixed

The C-type clamps are mainly used for 20KV overhead insulated conductors, aluminum stranded wires, steel-cored aluminum stranded wires, steel stranded wires and copper wires in non-stressed positions

The terminal connector is generally used to connect terminal outgoing lines of busbar downlead and electrical equipment(Such as transformer,breaker,mutual inductor,disconnecting switch and wall

This series insulation piercing connector is mainly used for wire branching The applicable voltage is 10kV, 1kV and less more than 1kV.

AS a splicing fitting,the parallel groove clamp for transmission power line is suitable for unending force splicing and branch on the aerial wire,being used with insulation cover.Its action is

Under the rated voltage,the splicing point temperature should not higher than the conductor temperature when through the max load electric current for long time.

H-type connectors are generally used in the crimp connection of jumpers, branch wires, lead wires, household wires, and house wires of overhead high-voltage and low-voltage power line towers.