Contact Us
- No.188 Jinjiang Raod, Dinghuo Town, Jiangdu District, Yangzhou City, China
- sales@cdpowerfitting.com
- +86-514-86978288
Copper Tape Fixing ClampThis tape fixing clamp is used to tightly connect the wire and the rod together.
Add to Inquiry
Oval Copper Crimp SleeveOval Copper Crimp Sleeve(oil plugging) are suitable for the connection of copper conductors (section 16-500mm2) in power cable with electronic equiment.
Add to Inquiry
Copper Parallel Groove ClampCopper parallel groove clamps are contact fittings that connect wires in parallel to transfer electrical loads. They are widely used, such as jumpers for non-straight poles and towers, T-wiring at
Add to Inquiry
Compression Type Jumper ConnectorThe Compression Type Jumper Connector is jumper connection accessory between two busbars in power transmission facility.
Add to Inquiry
Brass Parallel Groove ClampAll Kinds Of Brass Parallel Groove Clamp are suitable for using copper wire as conductor in the earthing system,fixing the copper wire on the earth rod.which is made of brass material,match with
Add to Inquiry
Insulating Piercing ClampThe insulated piercing clamp is composed of reinforced shell,piercing blade,sealed plate,waterproof silicone grease, high strength bolt, torque nut and cable terminal cap cover.
Add to Inquiry
Aluminium Alloy Terminal ConnectorThe terminal connector is generally used to connect terminal outgoing lines of busbar downlead and electrical equipment(Such as transformer,breaker,mutual inductor,disconnecting switch and wall
Add to Inquiry
Double Conductor Terminal ConnectorThis type Compression Terminal Clamps for Double Wire are applicable to connect copper conductor with aluminum terminal of electric device, qualified for good electric contact performance suitable
Add to Inquiry
Copper-aluminium PG ClampCopper-aluminium PG clamp is used for the Non-bearing connection and offset of aluminium stranded wire,copper core aluminium stranded wire,copper brand wire.
Add to Inquiry
Piercing Ground Connector ClampInsulation piercing connector is mainly suitable for the connection of the overhead insulation conductor, branch connection and grounding protection, It is used for the voltage which is 20KV, 10KV
Add to Inquiry
Bimetallic Al-Cu Parallel Groove ClampThe bimetallic Al-Cu parallel groove clamp is a widely used contact fitting to transfer electric load and parallel wires.The splicing of jumper wire for non-linear tower,branch
Add to Inquiry
Aluminium Compression Repair SleeveUnder the rated voltage,the splicing point temperature should not higher than the conductor temperature when through the max load electric current for long time.
Add to Inquiry





