China splicing reducer Manufacturers Factory Suppliers

This series insulation piercing connector is mainly used for wire branching The applicable voltage is 10kV, 1kV and less more than 1kV.

The C type connector belongs to the field of non-load-bearing connectors in the power network, and is particularly suitable for the connection of the branch wires of the main line and the sub-line in

The Adjustable PG Clamp is used to connect two parallel bare conductors.And the conductors can be aluminium alloy or aluminium steel reinforced and copper conductor.

All Kinds Of Brass Parallel Groove Clamp are suitable for using copper wire as conductor in the earthing system,fixing the copper wire on the earth rod.which is made of brass material,match with

The Down Leading clamp is uswd to fix the cable to splice pole/tower and terminal pole/tower in the down-lead to the closure.

The lightning protection piercing connector is a product with a new structure. It is mainly installed on the load side of the line insulator. It has the protective function of preventing 10KV

Our PG clamps are divided into: Aluminium PG clamp, Copper PG clamp, Bimetallic PG clamp. The parallel groove clamp is suitalbe for unendure force splicing and branch on the aerial wire, being used

Parallel Groove PG Clamp is used in the connecting of Aluminum cable, Steel cored Aluminum cable or overhead ground wire strand for small and medium-size section at the position of not under tension,

This type Compression Terminal Clamps for Double Wire are applicable to connect copper conductor with aluminum terminal of electric device, qualified for good electric contact performance suitable

it is a kind of accessories for electrical connections.We supplies a full range of cable lugs to satisfy different demand with premium quality.There must be one meets your criteria.

The Aluminium Compression Tap Connector is generally used in connection of jumper wires,branch lines,lead wires,service mains and other wires on the tower in overhead high-voltage and low-voltage

H-type connectors are generally used in the crimp connection of jumpers, branch wires, lead wires, household wires, and house wires of overhead high-voltage and low-voltage power line towers.