China Power Fitting Turnbuckle Manufacturers Factory Suppliers

The turnbuckle is also called turn buckle,which is a wire rope clamp used to bind and fasten steel wire rope.

The cotter pin of hinge clevis tongue is stainless steel, the other parts are hot-dip galvanized steel.

The u shackle is one of the general power fittings used in overhead power transmission line.It is forged by hot-dip galvanized round steel,which can be single or series widely used.

The Acring Horn Ball Link is used in high voltage transmission line. It can be installed with acring horns.

The yoke plate is made of hot-dip galvanized steel. It can be made according to the requirements of customers including shape, sizes and so on.

Power line fitting is used in overhead transmission line to hang and tight up insulators and wires in the pole tower.In addition,it is used for connecting and vibration-proof of wires and lightning

Link fittings are fittings used to connect insulators,suspension clamp,tension clamp and protective fitting to assemble suspension or tension set.

Wire Rope Thimbles are used in wire rope assemblies to keep an eye from being crushed. When a wire rope assembly is terminated with an eye or loop at the end, a cable thimble is inserted to form the

Ball Y-clevises are used to attach ball and socket insulators to other associated hardware. The bent bolt in the Y-clevis section provides an additional point of articulation.

The socket eye is made of hot-dip galvanized steel. The security clip is stainless steel and the cotter pin is stainless steel.

The Socket Clevis are malleable iron or casting steel,these purity clips are bronze or stainless steel,cotter pins are stainless,ferrous parts are hot-dip galvanize steel.

The adjusting plate plays a crucial role in ensuring the safety and reliability of the power transmission system. It is designed to facilitate the adjustment of the height and angle of the conductor