China splicing goods Manufacturers Factory Suppliers

Watertight mould for tapping services or mains with insulation piercing (FT) with 1 or 2 taps.This mould is to be used with our simultaneous tightening connectors type TTD as can use for separate tap

-The Mechanical connectors can accommodate ACSR conductors over armor rod within the diameter range indicated-Application over armor rod-Used for all Combinations of copper, aluminum, ACSR, AAAC and

Hydraulic Jumper Connectors are used to bridge two electrical components in a circuit, thereby providing a continuous flow of current. They are designed to withstand high voltage and current loads,

Description: Insulation Piercing Connector is suitable for aluminum and copper conductors and componentsnot losable, end cap attached to body, Insulation material made of weather resistant glass

The parallel clamp for AAC & ACSR Conductor are suitable for connecting suspension insulators into a string and hang the string in tower or  connect strain clamp and insulator string in the straight

All Kinds Of Brass Parallel Groove Clamp are suitable for using copper wire as conductor in the earthing system,fixing the copper wire on the earth rod.which is made of brass material,match with

Down lead clamp is used to lead cable down from the tower or pole in order to protect the cable from wear with tower or pole.Down lead is mainly used for ADSS and OPGW fixture in tower on cable fixed

The insulated terminal is one of the power transmission line accessories to realize electrical connection.

The terminal connector is generally used to connect terminal outgoing lines of busbar downlead and electrical equipment(Such as transformer,breaker,mutual inductor,disconnecting switch and wall

The splicing sleeves for ACSR are used for splicing or repairing of aerial conductor and ground wire of transmission line.

AS a splicing fitting,the parallel groove clamp for transmission power line is suitable for unending force splicing and branch on the aerial wire,being used with insulation cover.Its action is

Under the rated voltage,the splicing point temperature should not higher than the conductor temperature when through the max load electric current for long time.