China splicing adapter Manufacturers Factory Suppliers

This tape fixing clamp is used to tightly connect the wire and the rod together.

The C type connector belongs to the field of non-load-bearing connectors in the power network, and is particularly suitable for the connection of the branch wires of the main line and the sub-line in

Our PG clamps are divided into: Aluminium PG clamp, Copper PG clamp, Bimetallic PG clamp.

Description: Insulation Piercing Connector is suitable for aluminum and copper conductors and componentsnot losable, end cap attached to body, Insulation material made of weather resistant glass

JBTL series bimetal parallel groove clamp is suitable for unendurable force splicing and branch of the aerial wire. It has the function of protection and insulation when it matches insulating sheth.

There is no need to remove the insulator skin of cable to make the cable branch.The main cable do not need to be cut down,the branch can be made at any place of the cable as the joint is completely

This series insulation piercing clamp is mainly used for wire branching The applicable voltage is 10kV, 1kV and less more than 1kV.

Repair sleeves play an important role in maintaining the integrity of power transmission lines. These sleeves are used to repair a damaged section of a power line, preventing the need for costly and

The galvanized guy clamp is used for connecting or branching steel wires.

Parallel Groove PG Clamp is used in the connecting of Aluminum cable, Steel cored Aluminum cable or overhead ground wire strand for small and medium-size section at the position of not under tension,

H Type Tap Connector is suitable for non-load-bearing splices and branches of conductors in overhead lines. H Type Tap Connector can be equipped with an optional insulation cover to provide

The outer splicing of mid span joint is aluminium,the inner sleeve is hot-dip galvanized steel.