China sand link fitting Manufacturers Factory Suppliers

The surface of the guy attachment should be hot dip galvanized, and the surface should be smooth and not be missed plating, zinc particles, bubbles, cracks and other defects, galvanized layer in

The u shackle is one of the general power fittings used in overhead power transmission line.It is forged by hot-dip galvanized round steel,which can be single or series widely used.

The twisted u shackle is one of the general power fittings used in overhead power transmission line.It is forged by hot-dip galvanized round steel,which can be single or series widely used.

Link fitting are used to link clamps to insulator,or to link insulator and ground wire clamps to arms or subjection strutures.

As one of Link fitting, the extension Y clevis is used to link other fittings in tension strings.

The thimble eye nut is used forattaching to thru bolt or thimble bolts for straight away head guys.Drop forged steel,manufactured from ANSI/IEEE Std C135.80.Hot-dip Galvanized to meet ASTM A153

The socket tongue is made of hot-dip galvanized steel. Security clip is stainless steel, the cotter pin is stainless steel.

Link fittings are fittings used to connect insulators,suspension clamp,tension clamp and protective fitting to assemble suspension or tension set.

The Hot-dip Galvanized Turnbuckle can adjust the tightness of steel rope by stretching out and drawing back the the leading screw.It can be used to binding components in component transition and

The yoke plate is suitable for assembling the suspension insulator to string, and it is also used for connection of one or several strings insulator and then suspending on the pole arm of perch as

The turnbuckle is one of the link fittings for power transmission line.it is hot-dip galvanized steel and composed of left and right hand thread adjustment rod,nut and pull rod,of which the

It can be processed by steel plate or ball mill cast and cast steel according to the structural features.